Wilder Technologies SATA 2.5 Test Adapter Especificaciones descargar pdf (Pagina 47)

Agilent Technologies, Inc.

Agilent Technologies, Inc. 47 SATA PHY, TSG & OOB Test MOI v.1.1 Revision 1.4

Example Typical products behavior for out of specification COMINIT/COMRESET sequence at 40mV or

60mV

Observable Results:

Verify that the products consistently response to each COMINIT/COMRESET sequence under the

following sequence parameters:

6 x (COMINIT/COMRESET burst + 480UI gap)

+1 x (45,000UI gap)

Verify that the products respond consistently to each COMINIT sequence when voltage threshold is

changed to 210mV

Verify that the products does not respond consistently when voltage threshold is changed to 40mV (Gen1

only) or 60mV (Gen 2 or Gen3)

Pass/Fail Criteria

• For products running at 1.5Gb/s ONLY:

o Verification of NO products OOB detection at 40mV

o Verification of products OOB detection at 210mV

o If any of the above cases fails, this is considered a failure by the products.

• For products running at 3Gb/s or 6Gb/s:

o Verification of NO products OOB detection at 60mV

o Verification of products OOB detection at 210mV

o If any of the above cases fails, this is considered a failure by the products.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 86 87

Sin comentarios

Wilder Technologies SATA 2.5 Test Adapter Especificaciones Pagina 47