Agilent Technologies, Inc.
Agilent Technologies, Inc. 5 SATA PHY, TSG & OOB Test MOI v.1.1 Revision 1.4
December 13
th
, 2006 (Version 0.99d)
Fei Xie: PHY02 Procedure detail
January 9
th
, 2007 (Version 0.99e)
Fei Xie: PHY02 Procedure detail with screenshot.
January 31
st
, 2007 (Version 0.99f)
Fei Xie: OOB 01, 06, 07 update to new method. Jitter algorithm update to new method. Added return loss Appendix
October 31
st
, 2007 (Version 0.9 Revision 1.3) new nomenclature adopted by LOGO
Bryan Kantack: Updated PHY-02 and PHY-04 measurement detail per ECN 016 changes. Updated OOB-02, OOB-03, OOB-04,
OOB-05 measurement detail per ECN 017 changes. Updated TSG-07 & TSG-08 to be INFORMATIVE per ECN 006. Updated TSG-09, TSG-
10, TSG-11 & TSG-12 per ECN 008. Updated TSG-09, TSG-10, TSG-11 & TSG-12 clock recovery settings per the approved Jitter Transfer
Function definition. Added Appendix for the Calibration and Verification of Jitter Measurement Devices.
December 14
th
, 2007 (Version 0.9 Revision 1.3) new nomenclature adopted by LOGO
Bryan Kantack: Accepted all red-line edits and comments per LOGO committee walk-through. Incorporated new JTF calibration
documentation to include calibration of both 1.5Gpbs and 3.0Gbps clock recovery settings used for TSG-09 through TSG-12, in accordance with
the procedure used to calibrate the Agilent DSA91204A JMD for Interoperability Workshop #4, November 12-16, 2007.
February 26
th
, 2008 (Version 0.91 Revision 1.3) new nomenclature adopted by LOGO
Bryan Kantack: Replaced typographical references to Serial ATA Revision 2.5 with updated references to Serial ATA Revision 2.6.
Updated OOB-01 test procedure to include automated amplitude calibration procedure for 81134A stimulus.
June 5
th
, 2008 (Version 0.93 Revision 1.3)
Bryan Kantack: Updated references to Unified Test Document 1.3 resource tables and sections. Added clarification to calibration of
OOB Threshold measurements in OOB-01. Added graphics to Appendix E, Calibration of Jitter Measurement Devices, to clarify process steps.
June 12
th
, 2008 (Version 1.0RC Revision 1.3)
Bryan Kantack: Document red-line changes reviewed and accepted. Voted into approval by SATA-IO LOGO committee and rolled
version to 1.0RC.
July 25
th
, 2008 (Version 1.0 Revision 1.3)
Bryan Kantack: Passed 30-day member review. Released as Version 1.0 Revision 1.3
March 25th, 2009 (Version 0.8 Revision 1.4)
Bryan Kantack: Updated per Unified Test Document Revision 1.4 and SATA Revision 3.0 Specificatio n changes; added TSG-013
through TSG-016; updated Appendix E for 6Gb/s JTF calibration procedure
May 28th, 2009 (Version 1.0RC Revision 1.4)
Bryan Kantack: Moved to 1.0RC status per unanimous LOGO committee vote in acceptance of all proposed revisions and successful
results correlation through IW#7 dry-run testing.
August 19th, 2009 (Version 1.0RC2 Revision 1.4)
Min-Jie Chong: Updated per Unified Test Document Revision 1.4 V1.00RC2. Moved TSG-05 and TSG-06 to obsolete status.
August 27
th
, 2009 (Version 1.0 Revision 1.4)
Min-Jie Chong: Passed 30-day member review. Released as Version 1.0 Revision 1.4
September 16
th
, 2010 (Version 1.08 Revision 1.4)
Min-Jie Chong:
Added Agilent DSAX93204A oscilloscope to the equipment list.
Updated document to include total jitter at 1E-6 and 1E-12 measurements per ECN-39 as normative and the previously defined jitter
test requirements as informative only.
Added Wilder Technologies SATA Gen3 Receptacle Adapter SATA-TPA-R and ICT-Lanto SATA Receptacle Gen 3 TF-1R31 Test
Fixtures.
Added section outlining SerialTek BusMod BusGen BIST Generator as an alternate BIST mode and pattern generation tool.
Updated clock recovery settings for the oscilloscope JTF requirements.
Cleaned up language and document formatting.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales